Auto components & press shops
Every stroke measured. Every die change timed. True cost per piece.
Blitz puts a sensor on each press, from the 10-tonne to the 250-tonne. You see the strokes it ran, the minutes it stood, and what a piece costs at today's steel rate.
Power press or hydraulic · any make, any tonnage · the operator confirms the piece count
Where the margin goes
The shift sheet says 6,200 pieces. It does not say what they cost.
A press shop loses money in small ways. A die change planned for twenty minutes takes an hour. A press stands waiting for blanks from the shear. The customer wants a lower rate again this year, and nobody knows which part can bear it. The shift sheet shows none of it.
How many strokes did Press 12 run last night, and how many pieces a stroke?
How long did Press 7 stand for the die change and the setting?
If CR sheet moves ₹5 a kg, a 160 g piece costs ₹0.80 more. Which of your rates still hold?
Which part, on which press, makes money, and which only keeps the press busy?
On the press, not on paper
Each press reports its own strokes.
A sensor goes on each press, whatever its make or age. Blitz sees when it runs and when it stands, and measures every stroke. Pieces are strokes times the pieces per stroke, and your operator confirms that figure.
A die change, a wait for sheet, a jammed strip: each stop is timed from the minute it starts. Jarvis tells you while the press is still standing, not at the next morning's production meeting.
The number behind every rate
Cost per piece, by part and by press.
Steel and bought parts, power, labour and the month's overheads, added up against the press time the part really took. A part that takes three operations carries the cost of each press it passed through.
Material intake reads the supplier bill at your gate, so when CR sheet moves, the cost per piece moves with it. Blitz reads your bills from Tally and never writes to it.
How the cost of a piece adds upIllustration: a hinge bracket, 160 g of CR sheet a piece at ₹75 a kg, a bought bush at ₹1.50, three operations. Blitz works yours out from the runs you make. Strokes are measured at the press and pieces confirmed by your operator; rejects, rework and quality stay your call.
One product
Your press shop, floor to books, as one agent.
The presses, the steel store and your accounts stop telling three different stories.
Every press live: strokes, stops and the true cost of each piece.
See what Blitz shows →A photo of the steel bill at the gate. You approve it, and that rate is in every piece you press.
How the bill is read →The part of Blitz that talks. It tells you when a press stands, and answers questions like which part made money this month.
Meet Jarvis →Fitted while the shop runs
No die comes down, and you are live the same day.
No consultant and no long project. We set it up for you, on a thirty-year-old power press and a new hydraulic press alike. See why owners choose Blitz.
You set it, not us
Set up the way your press shop runs, and yours to change.
Shifts, pieces per stroke, pieces or kilos, and the sum that turns strokes into pieces: each is a setting, and you change it the morning the shop changes. A new die, a third shift, a part sold by weight. None of it waits on us.
Your shifts are rows you type: two of twelve hours, or three of eight, with your own start times.
You call it pieces per stroke. Blitz uses your words on every screen.
You say what each product is measured by: pieces for a bracket, kilos for washers sold by weight. Blitz never adds the two.
Strokes times pieces per stroke is a line of arithmetic you can read. Change the die, and you correct it yourself.
If a part is sheared, blanked, formed, then welded, you set that route once. Every job on it carries the cost of each machine it passed through.
A new enquiry
A firm rate for a part you have never pressed.
A buyer sends a drawing and wants a rate per piece by evening. Tell Blitz the steel in one piece, scrap included, and how many pieces an hour the die should give. Blitz takes the hourly cost of that press from your own record, then adds packing, transport and your margin.
Or ask Jarvis, while the buyer is still on the line.
See how a new job is pricedThe hourly cost comes from what your presses ran and what you paid, so you can stand behind the rate later. If an input is missing, Blitz says which one. It does not guess.
What press shop owners ask us first.
How does Blitz know how many pieces a press made?
A sensor on the press measures every stroke. Blitz multiplies the strokes by the pieces per stroke, and your operator confirms the figure. You get running time, stops and true cost per piece for every press.
Will it work on old power presses as well as hydraulic presses?
Yes. Any press, any make, any age. No die comes down to fit the sensor. A thirty-year-old power press reports the same way as a new hydraulic press.
How is the true cost per piece worked out?
Blitz adds the steel in the piece at the rate on your latest bills, bought parts such as a rivet or a bush, power, labour and the month's overheads, against the press time the part really took. Material intake reads each steel bill at your gate, and Blitz reads Tally and never writes to it.
Does Blitz track rejects, rework and die wear?
No. Blitz measures the press: strokes, running time and stops. Rejects, rework, die wear and quality stay your call, and your operator confirms the piece count. You get the hours each press lost and the true cost of its pieces.
See what each pressed part really earns.
Book a 20-minute demo. Put it on a few presses and compare a week of measured strokes with your shift sheets.